Tech Sport 8 ft Trampoline Netting (inside type for 6 straight poles)
- Product Code: TS-NET-8-6
- Availability: In Stock
Or Call to Order:Ireland: 021 435 4518
UK: 0151 433 2772
Int: +353 21 435 4518
This replacement trampoline netting is for a Tech Sport 8 ft (243cm) Trampoline.
Your trampoline is measured along its diameter from outer edge to outer edge including the Springs.
This 8 ft replacement trampoline netting is for the 10ft Tech Sport 6 curved pole Trampoline
Fitting your Replacement Trampoline Netting
First check netting is the right way around and not inside out as it would be too tight. The right way around is, netting to inside, pole inserts to outside and at the entrance the clips are to outside.
Next insert part of pole into each of the pole slots on the trampoline.
You might need a ladder to help with this part depending on the height of the poles on your trampoline. Do not pull any individual one all the way down, otherwise the last ones will not reach the top.
Next, when you get all the netting started on all poles, it will look something like this then, you can put each down bit by bit from standing inside trampoline.
Lastly tie the straps that come at end of the trampoline netting around the frame and hook onto the trampoline jump mat eyelets or suitable secure point.